Extang Xceed Problems

Are you tired of dealing with frustrating tonneau cover issues? 

Look no further! In this blog post, we’ll dive into the common problems Extang Xceed owners face and explore practical solutions to tackle them head-on. 

From faulty latches to water leakage, we’ll address it all. Don’t let these problems hinder your truck bed protection any longer. 

Extang Xceed Problems

The Extang Xceed cover may have a few problems: Fading color, Seal movement, and Loud noise. However, it can be an exact fit for certain truck models like the Ford F-150 Limited. 

Some users had issues with rail length for long-bed trucks. Leaking at the front bed corners was a problem for some users, but Ford has addressed it. 

10 Extang Xceed Problems: Causes, Address, and Fixes

Water Leakage

Water leakage is common with the Extang Xceed truck bed cover. The main cause of water leakage is typically improper installation or a damaged weather seal. 

Inspect the weather seal

Check for any tears, cracks, or gaps in the weather seal. If you notice any damage, it will need to be replaced.

Clean the bed rail surface

Ensure the bed rail surface is clean and free from debris or dirt. Use a mild soap and water solution to clean it thoroughly. Dry the surface before proceeding.

Reinstall or replace the weather seal

If the weather seal is in good condition, reinstall it properly along the bed rail, making sure it is aligned correctly.

If the seal is damaged, replace it with a new one from the manufacturer.

Test for leaks

After reinstalling or replacing the weather seal, close the cover and spray water over the truck bed.

Inspect the interior for any signs of water leakage. If there are still leaks, consider contacting Extang customer support for further assistance.

Latch Malfunction

If you are experiencing latch malfunction issues with your Extang Xceed truck bed cover, it could be due to a misaligned or damaged latch mechanism. 

Inspect the latch mechanism

Check if the latch mechanism is aligned correctly and not obstructed by any debris.

Clear away any dirt or obstructions that may prevent the latch from functioning correctly.

Lubricate the latch

Apply a light coat of lubricant to the latch mechanism to ensure smooth operation. Be sure to use a lubricant the manufacturer recommends to avoid any potential damage.

Adjust latch alignment

If the latch still malfunctions after cleaning and lubrication, it may need adjustment.

Consult the Extang Xceed user manual or contact customer support for guidance on properly adjusting the latch mechanism.

Tension Adjustment Issues

Improper tension adjustment can lead to problems such as cover sagging or difficulties in opening and closing. 

Identify the tension control knobs

Locate the tension control knobs on the cover assembly. They are usually located near the rear end of the cover.

Adjust the tension

Turn the tension control knobs clockwise to increase tension and counterclockwise to decrease tension.

Make small adjustments and test the cover’s functionality after each adjustment.

 Test the cover operation

Open and close the cover several times to adjust the tension properly. The cover should open and close smoothly without any binding or excessive resistance.

Poor Fit or Misalignment

Another potential problem you may encounter with the Extang Xceed truck bed cover is poor fit or misalignment.

This can occur due to installation errors, incorrect measurements, or wear and tear over time.

A misaligned or ill-fitting cover can compromise its effectiveness and lead to various issues, such as water leaks or difficulty in opening and closing the cover.

Inspect the Alignment

Start by visually inspecting the alignment of the cover on your truck bed. Look for any noticeable gaps, unevenness, or misalignments.

This will help you identify the specific areas that require adjustment.

Check the Clamps and Mounting Hardware

Verify that all clamps and mounting hardware are securely fastened and properly positioned.

Ensure that the cover is properly aligned with your truck’s bed rails. If clamps or mounting hardware appear loose or damaged, tighten or replace them as necessary.

Adjust the Tension

Many truck bed covers, including the Extang Xceed, have a tension control system to ensure a snug fit.

Refer to the manufacturer’s instructions or user manual to adjust the tension properly.

This may involve tightening or loosening specific components or adjusting the position of the cover to achieve the desired fit.

Seek Professional Assistance if Necessary

If you cannot achieve a satisfactory fit or alignment on your own, consider seeking professional assistance. 

Contact Extang or a reputable automotive service center to get expert advice or arrange for a professional installation.

They can help ensure that your Extang Xceed is properly aligned and fitted to your truck bed.

Fading or Discoloration

Over time, exposure to sunlight and other environmental factors can cause the Extang Xceed cover to fade or discolor.

While this may not affect the functionality, it can impact the aesthetics.

Clean the cover surface

Use a mild soap and water solution to clean the cover surface thoroughly. Gently scrub any areas affected by fading or discoloration.

Apply a UV protectant

Purchase a UV protectant specifically designed for automotive applications. Follow the manufacturer’s instructions to apply the protectant to the cover surface.

This can help minimize further fading and discoloration.

Regular maintenance

To prevent future fading or discoloration, periodically clean and apply a UV protectant to the cover surface as recommended by the manufacturer.

Bed Rail Damage

Bed rail damage can occur due to various reasons, such as improper installation, accidental impact, or prolonged wear and tear. 

Inspect the bed rails

Carefully examine the bed rails for any signs of damage, such as dents, cracks, or bends. Identify the extent of the damage.

Determine repair options

Depending on the severity of the damage, you can repair the bed rail using appropriate tools or replacement parts.

In cases of extensive damage, replacing the bed rail may be necessary.

Repair or replace the bed rail

If the damage is minor, attempt to repair it using suitable tools and techniques.

Follow repair instructions provided by the manufacturer or seek professional assistance if needed. 

In cases where replacement is required, contact Extang or an authorized dealer to purchase a new bed rail.

Wind Noise During Driving

Excessive wind noise while driving can be a nuisance and may indicate a problem with the Extang Xceed cover’s installation. Follow these steps to address wind noise issues:

Check for loose components

Inspect the cover assembly, including the rails and hinges, to ensure they are securely fastened. Tighten any loose screws or bolts as necessary.

Verify proper alignment

Ensure the cover is correctly aligned with the bed rails, and there are no gaps or misalignments. Adjust the cover as needed to achieve a snug fit.

Install wind deflectors

Consider installing wind deflectors designed for the Extang Xceed cover.

These deflectors can help redirect airflow and reduce wind noise during driving. Follow the manufacturer’s instructions for installation.

Difficulty in Opening or Closing the Cover

If you encounter difficulties in opening or closing the Extang Xceed cover, it could be due to various factors, such as misalignment, latch issues, or tension problems. 

Check for misalignment

Ensure the cover is properly aligned with the bed rails. Adjust the cover’s position if needed to achieve a correct fit.

Inspect latch mechanism

Examine the latch mechanism for any obstructions or damage. Clear away debris and ensure smooth operation. Lubricate the latch, as mentioned earlier.

Adjust tension

Refer to the steps mentioned earlier to adjust the tension of the cover if necessary.

Test cover functionality

After addressing the above issues, test the cover’s opening and closing operation multiple times to ensure it functions smoothly without any difficulties.

Ripping or Tearing of the Fabric

One potential problem you may encounter is the ripping or tearing of the fabric.

Various factors, including rough handling, extreme weather conditions, or prolonged use, can cause this issue. 

If you notice any tears or rips in the fabric, it’s essential to address the problem promptly to prevent further damage and maintain the functionality of your truck bed cover.

Inspect the Damage

Start by carefully examining the extent of the damage. Identify the location and size of the tear or rip.

This will help you determine the most suitable course of action for repairing or replacing the fabric.

Clean the Area

Before attempting any repairs, make sure the affected area is clean and devoid of dirt or debris.

Use a mild soap or cleaner and a soft cloth to clean the torn section and its surroundings gently. Before proceeding to the following stage, let it entirely dry.

Apply a Fabric Repair Patch

If the tear or rip is small and manageable, you can use a fabric repair patch to fix it. These patches are readily available in hardware stores or automotive shops. 

Cut the patch to an appropriate size, ensuring it covers the damaged area with a small overlap. 

Apply a fabric adhesive to the patch and press it firmly onto the torn fabric.

Smooth out any wrinkles or air bubbles and let it dry according to the manufacturer’s instructions.

 Consider Professional Repair or Replacement

For more giant or more severe tears that cannot be adequately repaired with a patch, it may be necessary to seek professional assistance. 

Contact Extang or a trusted automotive service center to discuss the possibility of repairing or replacing the fabric component of your Extang Xceed truck bed cover.

Weak or Broken Hinges

Hinges are critical components that enable smooth operation and secure cover attachment to the truck bed. 

Over time, hinges can weaken or damage due to regular use, exposure to harsh weather conditions, or accidents.

Inspect the Hinges

Begin by examining the hinges for any signs of weakness, damage, or misalignment.

Look for visible cracks, excessive play, or parts not functioning as intended. This evaluation will help you determine the appropriate course of action.

Tighten Loose Hinge Bolts

If the hinges are loose, tighten the bolts securing them to the truck bed cover and the truck bed itself. 

Use the appropriate tools, such as a wrench or screwdriver, to ensure a snug fit. This simple step may resolve the issue if the hinges have become loose over time.

Replace Damaged or Broken Hinges

In cases where the hinges are damaged or broken beyond repair, it is necessary to replace them.

Contact Extang or an authorized dealer to obtain genuine replacement hinges for your Extang Xceed truck bed cover.

Lubricate Hinges

To maintain the longevity and smooth operation of the hinges, it is recommended to lubricate them periodically. 

Use a suitable lubricant, such as silicone spray or a specialized hinge lubricant, and apply it to the moving parts of the hinges. This will help reduce friction and prevent excessive wear.

Extang Xceed Maintenance Tips: Keeping Your Tonneau Cover in Top Shape

Cleaning the Tonneau Cover

To begin, regularly clean your Extang Xceed tonneau cover to prevent the buildup of dirt, debris, and other contaminants. 

Start by rinsing the cover with water to remove loose particles. Then, using a mild soap or a specifically formulated tonneau cover cleaner, scrub the surface gently with a soft brush or cloth. 

Be sure to pay attention to all areas, including the frame and hinges. Rinse thoroughly to remove any soap residue, and let the cover air dry before retracting or closing it.

Lubricating Moving Parts

Proper lubrication of the moving parts is crucial to maintain smooth operation and prevent premature wear. 

Apply a silicone-based lubricant to the hinges, locks, and any other moving components of your Extang Xceed tonneau cover. 

This will help reduce friction and ensure that the cover opens and closes effortlessly. Avoid using petroleum-based lubricants, as they can damage the cover material.

Inspecting Seals and Gaskets

Regularly inspect the seals and gaskets of your tonneau cover to ensure they are in good condition.

Over time, these components may wear out or become damaged, compromising the cover’s ability to provide a weatherproof seal. 

Check for any signs of cracking, tearing, or detachment. If you notice any issues, promptly replace the seals or gaskets to maintain the cover’s effectiveness in keeping water, dust, and debris out of your truck bed.

Adjusting Tension and Alignment

To ensure optimal performance, periodically check the tension and alignment of your Extang Xceed tonneau cover. 

The cover should be snugly fitted to your truck bed without being overly tight or loose.

If you notice any misalignment or excessive tension, adjust the tension control knobs or the clamps accordingly. 

This will help maintain a proper fit and prevent any unwanted movement or flapping of the cover during travel.

Protecting Against UV Ray

UV rays can cause fading, and deterioration of your tonneau cover over time.

To protect it from the damaging effects of the sun, consider applying a UV protectant specifically designed for tonneau covers. 

These products create a protective barrier that helps prevent color fading and cracking.

Apply the protectant according to the manufacturer’s instructions and reapply it to maintain long-lasting UV protection.

Removing Snow and Ice

If you live in an area with harsh winters, it’s important to remove snow and ice from your tonneau cover promptly. 

Excessive weight from snow or ice can strain the cover and potentially damage it.

Use a soft-bristle brush or a plastic shovel to remove any snow or ice buildup carefully. Avoid using sharp or metal tools that could scratch or puncture the cover material.

Are There Any Known Problems with the Best F150 Fiberglass Tonneau Cover?

The best f150 fiberglass tonneau cover is highly regarded for its durability and sleek design. However, some users have reported issues with water leakage during heavy rain, requiring additional sealant or adjustments. Despite this minor concern, the cover offers excellent security and protection for the truck bed.

FAQs

Final Words

Ensure a hassle-free ownership experience with the Extang Xceed tonneau cover. Address common issues like water leakage and latch malfunction by following simple steps. 

Adjust tension effortlessly and enjoy a custom fit for your truck. With easy installation and compatibility options, you can confidently tackle any problem. 

Trust in Extang’s warranty to provide the peace of mind you deserve. Experience the freedom of the Extang Xceed without worrying about problems.